Gig Resources

Advancing, stage, setlist, settlement and the room — the practical notes for a single show

What the engineer needs before you arrive, and how to spend the soundcheck

Stage plot and input list

The engineer needs a picture of the band and a list of what plugs in. Send both.

Stage plot

A top-down sketch is enough if it is accurate.

  • Where each person stands, which way they face, and where the monitors go.
  • Drum kit, amps and DI boxes marked, including anything that must not move.
  • Note left and right from the audience's point of view, and say so on the sheet.

Input list

One line per channel, in the order you want them on the desk.

  • Source, stand or clip, and whether it needs phantom power.
  • Who is on vocals, and which channels are spare.
  • Backline you are bringing versus what you need from the venue.
  • A multi-date technical rider lives under Tour Resources, On the Road. A one-off still needs this list.

Soundcheck

Use the time you are given. Do not spend it on the song you already know.

Order of work

Line check, then balance, then one song.

  • Drums and bass first, then guitars, then vocals. Vocals last means they are not fighting an unfinished kit.
  • Each person says what they need in the monitor in one sentence.
  • Play the loudest song and the quietest song, then stop. Save the rest for the set.

When there is no soundcheck

A line check during changeover is normal in small rooms.

  • Have a 60-second version: kick, vocal, and the loudest instrument.
  • Agree the monitor mix you can live with before you walk on.
  • Put fresh batteries in wireless packs before doors, not after the first song.

Your band's notes

Your stage plot notes, channel list and monitor preferences.

No notes yet.